Tuesday, 28 December 2010
How to Burn Photos to a CD
Wednesday, 3 November 2010
Panasonic - Lumix DMC-FH20
Introduction
Front
We were drawn to the candy apple red version of the Panasonic Lumix DSC-FH20 shown here, with its high-gloss paint job. The camera will also be available in silver, black, red and violet.
Up in the top right corner is a lamp that serves as both the self-timer indicator and an autofocus assist lamp when shooting in the dark.
| |
| This bright red number caught our eye at Panasonic's CES booth. |
Back
The 2.7-inch 230,000-dot LCD is raised on a beveled platform above the control section (or the control section is indented -- your choice). Unlike most recent cameras, Panasonic uses a physical switch at the top right to move between recording and playback modes, Given the camera's slender depth, a MODE button is used instead of a mode dial on top of the camera.
The four-way controller provides direct access to exposure compensation, flash control, macro mode and the self-timer. Pressing the center MENU/SET button brings up the main menu, pressing the Q. MENU button at the bottom right brings up the quick menu screen overlay. DISPLAY rotates information display alternatives in record and playback modes.
| |
| The raised LCD provides more depth for gripping top and bottom. |
Sides
The left side is bare, the right has the wrist strap connector and a small hinged door (don't bite your fingernails!) covering the single I/O connector.
| |
| The right side |
| |
| Wrist strap connector and I/O on the left |
Top
The speaker lies behind the four tiny holes on top of the camera. It's tough to see here, but there's a single hole on the shadowed side of the beveled top for the mono microphone. The unusual control up here is the red iA button on the right. It takes you directly to Panasonic's Intelligent Auto mode, which uses scene recognition to set aperture, shutter speed and ISO.
| |
| The controls are well positioned for easy access. |
Bottom
The latched battery compartment on the left will accept SD, SDHC and the new high-capacity SDXC memory cards. Actual retail models will not come with the umbilical cord shown attached to the tripod socket here: this was shot on the floor of a trade show, where untethered cameras tend to run away.
| |
| The tripod socket is oddly positioned at the right edge. http://www.digitalcamerainfo.com/content/Panasonic-Lumix-DMC-FH20-First-Impression-Digital-Camera-Review-21424.htm |
Saturday, 30 October 2010
DUE DATE FOR QUARTERLY STATEMENT OF TDS
Every person (including Central Government and State Governments) who has obtained a Tax Deduction or Collection Account Number (TAN) will be required to electronically furnish a quarterly statement of compliance with TDS provisions in Form No. 24C as per following time limits:
| Quarter ending on | Due date |
| 30th June | 15th July |
| 30th September | 15th October |
| 31st December | 15th January |
| 31st March | 15th June |
It is mandatory for all TAN holders to furnish this statement irrespective of whether any payment liable to TDS has been made or not. This will apply from the quarter ending on 30th June 2009.
Thursday, 7 October 2010
New Form 15CA & 15CB relating to remittance of payments to a non-resident or to a foreign company & CA Certificate
New Form 15CA & 15CB relating to remittance of payments to a non-resident or to a foreign company & CA Certificate
Currently, remittances to non-residents are allowed by banks if the person making the remittance furnishes an undertaking, accompanied by a certificate from a Chartered Accountant ("CA") certifying the rate for withholding tax as per section 195 of the Act. The banks then forward the certificates to the Reserve Bank of India ("RBI"), which in-turn forwards it to the Income tax department.
Finance Act, 2008 inserted a new sub section (6) to section 195 effective from April 1, 2008, which requires the person responsible for making payment to a non-resident to furnish information relating to such payments in forms to be prescribed. The Central Board of Direct Taxes ("CBDT") has now, by notification No 30/2009 dated March 25, 2009, prescribed a new rule 37BB in the Income Tax Rules, 1962 ("the rules") prescribing Form 15CA and Form 15CB to be filed in relation to remittances to non-residents under section 195(6) of the Income Tax Act, 1961 ("the Act"). This new rule is effective from July 1, 2009 and shall apply to all remittances being made after July 1, 2009. The process that will have to be followed, before any remittance can be made, is as under—
Step 1 : Obtain a certificate from a Chartered Accountant in Form No 15CB
Step 2:Furnish the information in Form No15CA
Step 3:Electronically upload Form 15CA on the designated website
Step 4:Take Print out of Form 15CA and file a signed copy
Step 5:Remit money to the Non Resident
Please note that all the above steps have to be undertaken before remittance of money to the non-resident.
Notification no. 30/2009 is as below:-
In exercise of the powers conferred by section 295 read with sub-section (6) of section 195 of the Income-tax Act, 1961, the Central Board of Direct Taxes hereby makes the following rules further to amend the Income-tax Rules, 1962, namely:-
1. (1) These rules may be called the Income-tax (Seventh Amendment) Rules, 2009.
(2) They shall come into force with effect from 1st July, 2009.
2. In the Income-tax Rules, 1962, after rule 37BA, the following rule shall be inserted, namely:-
"Furnishing of information under sub-section (6) of section 195.
37BB. (1) The information under sub-section (6) of section 195 shall be furnished by the person responsible for making the payment to a non-resident, not being a company, or to a foreign company, after obtaining a certificate from an accountant as defined in the Explanation to section 288 of the Income-tax Act, 1961.
(2) The information to be furnished under sub-section (6) of section 195 shall be in Form No. 15CA and shall be verified in the manner indicated therein and the certificate from an accountant referred to in sub-rule (1) shall be obtained in Form No. 15CB.
(3) The information in Form No. 15CA shall be furnished electronically to the website designated by the Income-tax Department and thereafter signed printout of the said form shall be submitted prior to remitting the payment.
(4) The Director-General of Income-tax (Systems) shall specify the procedures, formats and standards for ensuring secure capture, transmission of data and shall also be responsible for the day-to-day administration in relation to furnishing the information in the manner specified.
FORM NO. 15CA- Download
FORM NO. 15CB- Download
Friday, 24 September 2010
TDS - LATE DEPOSIT TDS -PAY INTEREST 1.5 % PM
The Finance Bill proposes to create a separate class of default in respect of tax deducted but not paid to levy interest at a higher rate of 1.5 per cent per month, i.e. 18 per cent p.a. as against 1 per cent p.m., i.e. 12 per cent p.a., applicable in case the tax is deducted late after the due date. The rationale behind this amendment is that the tax once deducted belongs to the government and the person withholding the same needs to be penalized by charging higher rate of interest.
- For late deduction of Tax deduction at source-(rate 1 % per month or part thereof)
- For late deposit of TDS after deduction (rate 1 % per month or part thereof)
- For late deduction of Tax deduction at source-(period date from tax deductible to date of actual deduction )(rate 1 % per month or part thereof)
- For late deposit of TDS after deduction (period :date from tax deducted and date of actual deposit)(rate 1.5 % per month or part thereof)
- http://www.simpletaxindia.org/2010/04/late-deposit-tds-pay-interest-15-pm.html
Saturday, 18 September 2010
TALLY DATA MIGRATION FROM 7.2 TO 9
| Note: The Data Migration Tool is resource intensive. It is recommended that you close all other applications when you migrate Data or TCP files. If an interruption occurs during the migration process, the migrated or partially migrated data will be deleted and you have to repeat migration for the same. |
- Click the tallymigration icon to start the migration
- Tally Data Migration and Tally 9 start simultaneously, in separate screens
- As soon as Tally 9 is loaded, the message 'Ready for Migration' displays in the Migration Messages Pane
- Click the Migrate Data option to select the company whose data is to be migrated from Tally 7.2 to Tally 9
- Specify the data path in the Directory field
- On selecting the company, the company is loaded
Quote:
Note: If you have placed the data to be migrated from Tally 7.2 to Tally 9 in the Tally 9 folder, you have to only specify the path and need not select the company. - If the company selected has Payroll data, the following screen appears
- To continue with the migration, press Enter
- Accept to migrate the selected company
- In the Migration Information screen on the left hand side, you can view the Types of Masters and Vouchers to be migrated from Tally 7.2.
- During the migration from Tally 7.2 to 9, the status of the migration appears in the screen on the right hand side, which displays the number of Masters and Vouchers that have migrated to Tally 9.
Quote:
Note: As certain voucher types and units have been removed from Tally 9, there will be a difference of 3 in the total number of Voucher Type Masters and 1 in the number of Unit Masters. - When the migration is complete, an Information pop-up message appears as shown below.
- On pressing any key, a Congratulations message appears as shown below
- If errors occur during migration, they are displayed in red in the Migration Messages Pane as shown in the following screen.
Quote:
Note: If an error "The Cost Centre 'ABC' does not belong to the Category 'XYZ' appears during migration, rewrite Tally 7.2 data with Tally Data Migration Tool using Ctrl + Alt + R and then migrate the data to 9. - The migrated companies are saved in the Tally 7.2 data folder. The migrated data is prefixed with a '0' and appears as a 5 digit number.
- Now you can work on Tally 9 with the migrated data
Quote:
Note: The migrated data will reside in the folder where it was at the time of migration.
Saturday, 11 September 2010
How to type Indian Rupee Symbol in Text
As we all know that India has got a Symbol for Currency. Now we all have to use the new symbol but the symbol is not available on the keyboard. By doing a little work we can create a rupee symbol and we can use it in our word documents, excel spreadsheet etc.
Here are the steps
Click Start -> Run -> Type eudcedit.exe
Private character editor will get opened
Select the first empty code as shown above
Click OK
Click Edit menu -> Copy Character
Change the font by clicking on Font Button and set desired font (I selected Georgia).
Click OK
Select Letter 'R'
Click OK
Modify the letter by using tool like pencil, rectangular selection etc
Now we can link this symbol to existing fonts
- File -> Font Links
- Click Link with all fonts
- Click OK
Using the Rupee Symbol into a text The characters for private use are accessible via the "Character Map".
To insert Rupee Symbol into a text:
- Set the cursor to the correct position within your text.
- Click on "Start" -> "Programs" -> "Accessories" -> "System Tools" -> "Character Map"
- The Character map will display all private characters.
- Select the Rupee Symbol to insert and click on select.
- Click "Copy".
- Go back to your text and press Ctrl+V to insert the Symbol from the clipboard into the text.
This Symbol will work only on the machine, it was created, unless you save it into a separate font-file and distribute it together with your document.
That's it.
http://mscoder.wordpress.com/2010/07/18/how-to-type-indian-rupee-symbol-in-text/